Cymbal Cleaner
Removes dirt, marks & smudges
For drummers, who prefer to clean their cymbals less frequently. Removes tougher stains and impurities. Restores shine.
-
Preliminary Considerations
None
-
Compatibility
Not suitable for Gongs.
See Compatibility Matrix for cymbals.
-
Use Instructions
- Shake well before use.
- Use microfiber or clean/soft cloth.
- Spray a moderate amount evenly onto cymbal from a distance of about 30 cm / 12 inches.
- Wipe quickly using circular motion from inside to outside. Do not use force, especially on logos and labels.
- Remove any cleaner residue with slightly wet cloth and dry.
-
Safety Precautions
- Use in well-ventilated room.
- Protective gloves and protective eye-wear recommended.
-
First Aid Measures
Eye contact – rinse carefully with water for several minutes. Remove contact lenses if possible. If eye irritation persists, get medical advice/attention and have container at hand.
Inhalation – seek fresh air and ensure unobstructed breathing.
Skin contact – wash affected areas with plenty of water.
Ingestion – in case of discomfort, contact local poison information center or get medical help.
-
Recycling
Cap – Plastic

Please check your local guidelines for Polypropylene recycling
Container - Aluminum

Please check your local guidelines for Aluminum recycling
-
Country of Origin
Switzerland
-
Catalog Number
AC29221
-
Content Disclosures
CAS-No.: 97489-15-1 / ≥ 1 – < 5%
Sulphonic acids, C14-17-sec-alkane-, sodium saltsCAS-No.: 9043-30-5 / ≥ 1 – < 5%
Isotridecylalkohol ethoxylated (3 EO)CAS-No.: 79-33-4 / ≥ 1 – < 5%
- l-(+)-Lactic acidCAS-No.: 3811-73-2 / < 0.01%
Pyridine-2-thiol 1-oxide, sodium salt; pyrithione sodium; sodium pyrithione -
Unique Formula Identifier
P9NR-P5WY-CHMN-XQ54
- Safety Data Sheet